Security levels
Off
Owner and Non-owner cards are treated the same
Memory
Non-owner cards can access SIM memory. Any changes to
the memory setting requires the security code.
The owner card has access to all features, but the security
code is required to change a memory setting
Phone
The security code is required upon power-up
11
[ 68 ]
Set your security level
1
At the Start screen, press Menu 4-7-3 (Settings - Security settings -
Security level).
2
After a brief pause, you’re prompted to enter the security code.
The default code is 12345. Enter the security code and press OK.
3
Scroll to Off, Memory, or Phone and press Select.
• FIXED DIALING
Once you setup and activate a fixed dialing list, your phone can make
calls only to those numbers that you’ve defined in the fixed dialing list.
Fixed dialing is a network feature and must be supported by your
wireless provider.
Set up and activate a fixed dialing list
1
At the Start screen, press Menu 4-7-2 (Settings - Security Settings -
Fixed dialing).
The options in the following table appear in the display:
Note: If you activate fixed dialing and the number list is empty, all
outgoing calls, except for emergency numbers such as 911, require
entry of the PIN2 code.
2
Scroll to Number list and press Select. Fixed dialing not active and
then Fixed dialing list empty appear in the display.
3
You’re prompted to enter the PIN2 code. Enter the PIN2 code and
press OK.
Fixed dialing options
On
Activate fixed dialing (see note above)
Off